Asymmetric tank for catamaran 32 cm
Asymmetric tank for catamaran
Hydrodynamic, with a diameter of 32 cm, equipped with an editorial in the bow and stabilizer of the stability in the rear of the cylinders. Cylinders are made of high-strength German PVC fabric, density 750, with additional protection of the entire bottom of the cylinders. The hydrodynamic shape and the small diameter of the cylinders imply rapid movement with minimal effort and excellent exchange rate stability. Therefore, these inflatable BOATHOUSE balloons are best used to build a lightweight catamaran or trimaran.
Calculation of the length of the upper platform is done as follows: 90 cm from the nose and 80 cm from the end of the cylinders. For example, for inflatable balloons for catamarans 4 m long, you can set the pad 230 cm long. The payload is calculated individually, depending on the expected draft and weight of the vessel. For example, you can use the commercially available STREAM kayaks on precisely these cylinders. It should be noted that a large list of additional equipment will help you greatly improve the ease of operation and create a unique and safe catamaran.
BOATHOUSE inflatable balloons for catamarans, inflatable boats, and kayaks are made from one-piece high-quality PVC fabric made in Germany with a density of 750 and 900. This is a rather complicated and costly method, especially when making large cylinders with a length of 6-8 meters. But thanks to this technology, the cylinder has only one seam, which is located below and is the strongest part, because it has triple fabric (two safety tapes are used - on the top and bottom of the seam). It is almost impossible to break through the balloon in this place (from the bottom of the balloon), taking into account the additional protection of the entire lower part of the cylinders over triple fabric.
The configuration of the cylinders can be "nose-to-nose" or conventional asymmetric. Nose-nose cylinders can be used to build a catamaran for mountain rivers, where directional stability is not important, and most importantly, good germination on the wave and passability, both front and back. The usual asymmetric form of cylinders is used to build catamarans and trimarans with good directional stability. But the most important thing is that all BOTHAUS cylinders can be considered standard in terms of hydrodynamic indicators - a small angle of attack on water, minimal resistance and excellent germination per wave.
All cylinders are identical to commercially available models that have different diameters - 32 cm, 38 cm, 42 cm, 45 cm, 50 cm, 55 cm, 60 cm and 65 cm. Thus, 8 types of inflatable balloons in two configurations can be made of any length (from 3 m to 9 m) and with any additional. equipment that will greatly facilitate the task of construction, will create additional amenities and a beautiful appearance.
Therefore, using BOTHAUS inflatable balloons to build your catamaran or trimaran, you provide your future vessel with excellent technical and operational characteristics, increased safety and reliability. What configuration, what diameter of cylinders and what length is more suitable for you - you will determine this by analyzing the information on our website on a model of a boat with the same diameter of cylinders. If questions arise, our experts will help you make the appropriate calculations.
Good prices, excellent quality, the correct configuration, and most importantly - excellent hydrodynamic performance - the foundation of any catamaran, will allow you to build a very good boat with excellent speed and driving characteristics.
"Having BOATHOUSE - you live with pleasure."
- This product has a minimum quantity of 2